Part Number
PXH842 Host and Target Transparent Cable Adapter
PCIe 3.0 Products
[Dolphin Interconnect Solutions]
The PXH842 PCIe 3.0 Host Adapter is our high performance cabled interface to external IO subsystems. Based on Broadcom® PLX PCI Express 3.0 bridging architecture, the PXH842 Transparent Host and Target adapter includes advanced features for transparent bridging (TB), host and clock isolation.
Product
PCI Express 3.0 Transparent Host and Target Adapter
Model
PXH842 Host and Target Transparent Cable Adapter
Vendor
Dolphin Interconnect Solutions
Category
Automation & Industrial
Product Group
Dolphin ICS
Type
PCIe 3.0 Products
Consulting
Requirements analysis and custom system design
Implementation
Integration guidance and lifecycle technical support
Verification
Testing against specifications and industry standards
Technical Profile
PXH842 Host Adapter Description
The PXH842 PCIe 3.0 Host Adapter is our high performance cabled interface to external IO subsystems. Based on Broadcom® PLX PCI Express 3.0 bridging architecture, the PXH842 Transparent Host and Target adapter includes advanced features for transparent bridging (TB), host and clock isolation. The PXH842 card utilizes the Samtec PCIe FireFly® optical engine enabling distances up to 100 meters.
The PXH842 card is a transparent only product. To utilize Dolphin's PCIe clustering software, you need to purchase the PXH840 PCIe 3.0 NTB Adapter card.
Variants
The card is available in several variants with reduced number of FireFly optical modules mounted. The maximum performance and supported topologies for these cards will vary. Details can be found in the following table:
PXH84x Transparent Host and Target variants
Installed FireFly devices
Supported PCIe configurations
Required MPO Patch Fiber Cable
PXH842
Two x8
x16, Two x8
Two 24 strand
PXH845
Four x4
x16, xTwo 8, Four x4
Four 12 strand
PXH846
One x8
x8
One 24 strand
PXH847
Two x4
x8, Two x4
Two 12 strand
PXH848
One x4
x4
One 12 strand
Fiber MPO Patch Cables
The PXH84x cards are carefully designed for maximum cable length and supports fiber cables up to 100 meter optical cables. The x8 FireFly device configuration requires two MPO female, 24 strand, OM3 50/125, Key up - Key up (Type C) cables. The x4 FireFly device configuration requires two MPO female, 12 strand, OM3 50/125, Key up - Key up (Type B) cables. More details on patch cables for FireFly products.
Features
• PCI Express® 3.0 compliant - 8.0 GT/s per lane
• Slot compliant with Gen1 and Gen2 PCI Express
• Samtec FireFly® optical engine
• MTP connectors
• Four x4 Gen3 PCI Express cable ports that can be configured as: ◦One - x16 PCI Express port ◦Two - x8 PCI Express ports ◦Four - x4 PCI Express ports
• Fiber-optic cable connectors
• Clock isolation support
• Low profile PCI Express form factor
• EEPROM for custom system configuration
• Link status LEDs through face plate
Specifications
Product Specifications
Feature
Description
Link Speeds
32 GT/s per port, total 128 GT/s
Cut Through Latency
138 nanoseconds
Active Components
Broadcom / PLX Gen3 PCI Express Switch
PCI Express®
Base Specification 3.0
Card Electromechanical Specification 3.0
Topologies
Point to point — Single Host card supports up to 4 downstream targets
Cable Connections
Fiber optic cable (AOC) support, up to 100 meters
Power Consumption
12 Volt : Max 18 Watt, typical 14 Watt with 4 FireFlys attached.
3.3 Volt : Not connected
3.3 VAUX : Max 1 Watt
Mechanical Dimensions
Low profile, Half Length - 68.90 mm (2.731 inches) x 167.65 mm (6.600 inches)
Operating Environment
Operating Temperature: 0°C - 55°C (32°F - 131°F)
Air Flow: 150 LFM
Relative Humidity: 5% - 95% (non-
Storage Environment
Storage Temperature: -40°C - 70°C (-40°F - 158°F)
Relative Humidity 95% (non-
Software
No special drivers needed for Transparent operation. Supports Dolphin Board Management Software
PCIe bracket
Full height plate mounted
Half height plate not included, only available for x8 and x4 configurations.
Configuration
DIP-
Host & Target configurations / safe boot
Regulatory
CE Mark
FCC Class A
RoHS compliant
UL94V-
Standard(s) for Safety
UL 62368-1 and CAN/CSA C22.2 No. 62368-1-14
Operating Systems
All
Order Information
Orderable part numbers:
PXH84x Transparent Host and Target variants
Part Number
Installed FireFly devices
PXH842
Two x8
PXH845
Four x4
PXH846
One x8
PXH847
Two x4
PXH848
One x4
Documentation/Software
Documentation
Resources