AutomationDolphin ICS

PXH830 PCIe NTB Host Adapter

PCIe 3.0 Products

[Dolphin Interconnect Solutions]

The PXH830 Gen3 PCI Express NTB Host Adapter is our high performance cabled interface to external processor subsystems. Based on Broadcom® Gen3 PCI Express bridging architecture, the PXH830 host adapter includes advanced features for non-transparent bridging (NTB) and clock isolation.

System Overview
  • Product

    PCI Express Gen3 x16 NTB Host Adapter

Product Information
  • Model

    PXH830 PCIe NTB Host Adapter

  • Vendor

    Dolphin Interconnect Solutions

  • Category

    Automation & Industrial

  • Product Group

    Dolphin ICS

  • Type

    PCIe 3.0 Products

AceTec Support
  • Consulting

    Requirements analysis and custom system design

  • Implementation

    Integration guidance and lifecycle technical support

  • Verification

    Testing against specifications and industry standards

Features

  • One x16 PCIe edge port
  • Four x4 PCIe cable ports
  • PCIe 3.0 cables
  • 0.54 microsecond latency
  • Low Profile Design
  • Quad SFF-8644 Connectors
  • Non Transparent Bridging
  • 128 Gigabit/s performance
  • PIO and DMA RDMA
  • Full Dolphin Software Stack

Description

PXH830 PCIe NTB Host Adapter Description

The PXH830 Gen3 PCI Express NTB Host Adapter is our high performance cabled interface to external processor subsystems. Based on Broadcom® Gen3 PCI Express bridging architecture, the PXH830 host adapter includes advanced features for non-transparent bridging (NTB) and clock isolation. The PXH830 card have a standard Quad SFF-8644 connector and uses standard PCIe 3.0 cables.

For high performance application developers, the PXH830 host adapter combines 128 Gbit/s performance with an application to application latency starting at 0.54 microseconds. Inter-processor communication benefits from the high throughput and low latency. Using the latest SmartIO technology software from Dolphin, applications can now access remote PCIe devices as if they was attached to the local system.

The PXH830 performs both Remote Direct Memory Access (RDMA) and Programmed IO (PIO) transfers, effectively supporting both large and small data packets. RDMA transfers result in efficient larger packet transfers and processor off-load exceeding 11 Gigabytes per second. PIO transfers optimize small packet transfers at the lowest latency. The combination of RDMA and PIO creates a highly potent data transfer system.

Dolphin's software suite takes advantage of PCI Express' RDMA and PIO data transfer scheme. Delivering a complete deployment environment for customized and standardized applications. The suite includes a Shared-Memory Cluster Interconnect (SISCI) API as well as a TCP/IP driver and SuperSockets software. The SISCI API is a robust and powerful shared memory programming environment.

The optimized TCP/IP driver and SuperSockets™ software remove traditional networking bottlenecks, allowing standard IP and sockets applications to take advantage of the high performance PCI Express interconnect without modification. The overall framework is designed for rapid development of inter-processor communication systems.

The PXH830 is carefully designed for maximum cable length and supports copper cables up to 9 meters at full PCI Express Gen3 speed. Fiber optics extends this distance to 100 meters.

The PXH830 card comes with a full license to the Dolphin eXpressWare software. The PXH832 Gen3 Adapter card does not include any software license and is well suited for high performance Transparent IO Expansion applications.

Features

• PCI Express® 3.0 compliant - 8.0 Gbps per lane

• Link compliant with Gen1 and Gen2 PCI Express

• Quad SFF-8644 Connectors

• PCIe 3.0 cables

• Four x4 Gen3 PCI Express cable ports that can be configured as: ◦One - x16 PCI Express port ◦Two - x8 PCI Express ports ◦Two NTB ports max

• RDMA support through PIO and DMA

• Copper and fiber-optic cable connectors

• Clock isolation support

• Non-transparent bridging to cabled PCI Express systems

• Low profile PCI Express form factor

• EEPROM for custom system configuration

• Link status LEDs through face plate

Specifications

PXH830 Product Specifications

FEATURE

DESCRIPTION

Link Speeds

32 Gbit/s per port, total 128 Gbit/s

Application Performance

0.54 microsecond latency (application to application)

< 130 nanoseconds cut through latency port to port

Active Components

Broadcom / PLX Gen3 PCI Express Switch with DMA

PCI Express®

Base Specification 3.0

Topologies

Point to point or 3 node Mesh Topology

Cable Connections

Quad SFF-8644 connectors. Copper cables, 0.5 - 9 meters

Fiber optic cable (AOC) support, up to 100 meters

Power Consumption

12 Volt : 14 Watt Max, (typical, 10 Watt without AOC )

+3.3 Volt : Max 3.3 Watt

+3.3 VAUX : Max 1 Watt

Cable Port Power supply

+3.3 Volt +/- 5%, 0.6 A per Cable Port

Mechanical Dimensions

Low profile, Half Length - 68.90 mm (2.731 inches) x 167.65 mm (6.600 inches)

Operating Environment

Operating Temperature: 0°C - 55°C (32°F - 131°F)

Operating Temperature with AOC: 0°C - 45°C (32°F - 113°F)

Air Flow: 150 LFM

Operating Temperature: 0°C - 50°C (32°F - 122°F)

Air Flow: ~0 LFM

Relative Humidity: 5% - 95% (non-condensing)

Storage Environment

Storage Temperature: -40°C - 70°C (-40°F - 158°F)

Relative Humidity 95% (non-condensing) at 35°C

Software

SuperSockets™ Berkley Sockets API

Microsoft WinSock2/LSP support

SISCI API

Advanced TCP/IP driver

Multicast groups

Max 16, default 4

PCIe bracket

Full height plate mounted

Half height plate included

Configuration

DIP-switch

NTB / Long cable / short cable / safe boot

Regulatory

CE Mark

FCC Class A

RoHS compliant

UL94V-0 compliant

Operating Systems

Windows

Linux

VxWorks

RTX

Order Information

Orderable part numbers:

PXH830 - NTB Host + Dolphin eXpressWare software license

PXH832 - Transparent Host + Target functionality

Documentation/Software

Resources