Part Number
MXH942 Host and Target Transparent Cable Adapter
PCIe 4.0 Products
[Dolphin Interconnect Solutions]
The MXH942 PCIe 4.0 Host Adapter is our high performance cabled interface to external IO subsystems. Based on Microchip PFX PCI Express 4.0 bridging architecture, the MXH942 Transparent Host and Target adapter includes advanced features for transparent bridging (TB), host and clock isolation.
Product
PCI Express 4.0 Transparent Host and Target Adapter
Model
MXH942 Host and Target Transparent Cable Adapter
Vendor
Dolphin Interconnect Solutions
Category
Automation & Industrial
Product Group
Dolphin ICS
Type
PCIe 4.0 Products
Consulting
Requirements analysis and custom system design
Implementation
Integration guidance and lifecycle technical support
Verification
Testing against specifications and industry standards
Features
- x16 PCI Express edge port
- Two x8/x4 PCIe optical cable ports
- Total 256 GT/s Throughput
- 120 ns Cut-Through Latency
- Low Profile Design
- PCIe 4.0
- Dual MPO connectors
- Samtec FireFly optical engine
- Host and Target operations
- Transparent bridging
Description
MXH942 Host Adapter Description
The MXH942 PCIe 4.0 Host Adapter is our high performance cabled interface to external IO subsystems. Based on Microchip PFX PCI Express 4.0 bridging architecture, the MXH942 Transparent Host and Target adapter includes advanced features for transparent bridging (TB), host and clock isolation. The MXH942 card utilizes the Samtec PCIe 4.0 FireFly® optical engine enabling distances up to 200 meters.
The MXH942 card is a transparent only product. To utilize Dolphin's PCIe clustering software, you need to purchase the MXH940 Gen4 NTB Adapter card.
Variants
The card is available in several variants with reduced number of FireFly optical modules mounted. The maximum performance and supported topologies for these cards will vary. Details can be found in the following table:
MXH94x Transparent Host and Target variants
Installed FireFly devices
Supported PCIe configurations
Required MPO Patch Fiber Cable
MXH942
Two x8
x16, Two x8
Two 24 strand
MXH945
Four x4
x16, Two x8, Four x4
Four 12 strand
MXH946
One x8
x8
One 24 strand
MXH947
Two x4
x8, Two x4
Two 12 strand
MXH948
One x4
x4
One 12 strand
Fiber MPO Patch Cables
The MXH94x cards are carefully designed for maximum cable length and supports fiber cables up to 200 meter optical cables. The x8 FireFly device configuration requires two MPO female, 24 strand, OM3 50/125, Key up - Key up (Type C) cables. The x4 FireFly device configuration requires two MPO female, 12 strand, OM3 50/125, Key up - Key up (Type B) cables. More details on patch cables for FireFly products.
Features
• PCI Express® 4.0 compliant - 16.0 GT/s per lane
• Slot compliant with PCIe Gen 1.0, 2.0, 3.0
• Samtec PCIe 4.0 FireFly® optical engine
• MPO connectors
• Four x4 PCI Express 4.0 cable ports that can be configured as: ◦One - x16 PCI Express port ◦Two - x8 PCI Express ports ◦Four - x4 PCI Express ports
• Fiber-optic cable connectors
• Clock isolation support
• Low profile PCI Express form factor
• EEPROM for custom system configuration
• Link status LEDs through face plate
Specifications
Product Specifications
Feature
Description
Link Speeds
64 Gbit/s per port, total 256 GT/s
Cut Through Latency
120 nanoseconds
Active Components
Microchip PCI Express 4.0 Switch
Samtec FireFly
PCIe 4.0
PCI Express®
Base Specification 4.0
Card Electromechanical Specification 3.0
Topologies
Point to point — Single Host card supports up to 4 downstream targets
Cable Connections
Fiber optic cable (AOC) support, up to 200 meters
Power Consumption (Max)
12 Volt: 2.95 A
3.3 Volt: 0.84 A
3.3 VAUX: 0.35 A
Mechanical Dimensions
Low profile, Half Length - 68.90 mm (2.731 inches) x 167.65 mm (6.600 inches)
Operating Environment
Operating Temperature: 0°C - 55°C (32°F - 131°F), Air Flow: 700 LFM (Preliminary)
Relative Humidity: 5% - 95% (non-
Storage Environment
Storage Temperature: -40°C - 70°C (-40°F - 158°F)
Relative Humidity 95% (non-
Software
No special drivers needed for Transparent operation
PCIe bracket
Full height plate mounted
Half height plate not included, only available for x8 and x4 configurations.
Configuration
DIP-
Host / Target
Regulatory Compliance
CE Mark
FCC Class A
RoHS compliant
Operating Systems
All
Order Information
Orderable part numbers:
MXH94x Transparent Host and Target variants
Part Number
Installed FireFly devices
MXH942
Two x8
MXH945
Four x4
MXH946
One x8
MXH947
Two x4
MXH948
One x4
New Tab
Resources