Part Number
MXH940 PCIe 4.0 x16 NTB Host Adapter
PCIe 4.0 Products
[Dolphin Interconnect Solutions]
The MXH940 PCIe 4.0 NTB Host Adapter is our high performance optical interface to external processor subsystems. Based on Microchip® PCI Express 4.0 bridging architecture and Samtec PCIe 4.0 FireFly® optical engine, the MXH940 host adapter provides advanced features for non-transparent bridging (NTB) over long distance PCIe.
Product
PCI Express 4.0 x16 NTB Host Adapter
Model
MXH940 PCIe 4.0 x16 NTB Host Adapter
Vendor
Dolphin Interconnect Solutions
Category
Automation & Industrial
Product Group
Dolphin ICS
Type
PCIe 4.0 Products
Consulting
Requirements analysis and custom system design
Implementation
Integration guidance and lifecycle technical support
Verification
Testing against specifications and industry standards
Features
- One x16 PCIe edge port
- Two x8/x4 PCIe optical cable ports
- MPO patch cable
- Low Profile Design
- Dual MTP connectors
- Non Transparent Bridging
- 256 Gigabit/s performance
- PIO and DMA RDMA
- Full Dolphin Software Stack
Technical Profile
MXH940 PCIe NTB Host Adapter Description
The MXH940 PCIe 4.0 NTB Host Adapter is our high performance optical interface to external processor subsystems. Based on Microchip® PCI Express 4.0 bridging architecture and Samtec PCIe 4.0 FireFly® optical engine, the MXH940 host adapter provides advanced features for non-transparent bridging (NTB) over long distance PCIe.
For high performance application developers, the MXH940 host adapter combines 256 Gbit/s performance with an application to application latency from 500 nanoseconds. Inter-processor communication benefits from the high throughput and low latency. Using the latest SmartIO technology software from Dolphin, applications can now access PCIe devices located in computers up to 100 metres way as if they was attached to the local system.
The MXH940 performs both Remote Direct Memory Access (RDMA) and Programmed IO (PIO) transfers, effectively supporting both large and small data packets. RDMA transfers result in efficient larger packet transfers and processor off-load. PIO transfers optimize small packet transfers at the lowest latency. The combination of RDMA and PIO creates a highly potent data transfer system.
Dolphin's software suite takes advantage of PCI Express' RDMA and PIO data transfer scheme. Delivering a complete deployment environment for customized and standardized applications. The suite includes a Shared-Memory Cluster Interconnect (SISCI) API as well as a TCP/IP driver and SuperSockets software. The SISCI API is a robust and powerful shared memory programming environment.
The optimized TCP/IP driver and SuperSockets™ software remove traditional networking bottlenecks, allowing standard IP and sockets applications to take advantage of the high performance PCI Express interconnect without modification. The overall framework is designed for rapid development of inter-processor communication systems.
The MXH940 card comes with a full license to the Dolphin eXpressWare software. The MXH942 Gen4 Adapter card does not include any software license and is well suited for high performance Transparent IO Expansion applications. The MXH940 card is fully supported in eXpressWare 5.19.2 and newer.
Supported topologies
Using the MXH940 card, you can connect two systems using PCIe 4.0 x4, x8 or x16 depending on the throughput requirements. You can also connect 3 systems using a x8 cable between each system or 5 systems using x4 cables.
Variants
The card is available in several variants with reduced number of FireFly optical modules mounted. The maximum performance and supported topologies for these cards will vary. Details can be found in the following table:
MXH94x NTB Host card variants
Installed FireFly devices
Supported PCIe configuration
Required MPO Patch Fiber Cable
MXH940
Two x8
x16, Two x8
Two 24 strand
MXH941
One x8
x8
One 24 strand
MXH943
Two x4
x8, Two x4
Two 12 strand
MXH944
One x4
x4
One 12 strand
MXH949
Four x4
x16, Two x8, Four x4
Four 12 strand
Fiber Patch Cables
The MXH94x cards are carefully designed for maximum cable length and supports fiber cables up to 200 meter optical cables. The x8 FireFly device configuration requires two MPO female, 24 strand, OM3 50/125, Key up - Key up (Type C) cables. The x4 FireFly device configuration requires two MPO female, 12 strand, OM3 50/125, Key up - Key up (Type B) cables. More details on patch cables for FireFly products.
Features
• PCI Express® 4.0 compliant - 16.0 GT/s per lane
• Slot compliant with Gen1, Gen2 and Gen3 PCI Express
• Samtec FireFly optical engine
• MTP connectors
• Four x4 Gen4 PCI Express cable ports that can be configured as: ◦ One - x16 PCI Express port ◦ Two - x8 PCI Express ports ◦ Four - x4 PCI Express ports
• Four NTB ports
• RDMA support through PIO and DMA
• Clock isolation support
• Non-transparent bridging to cabled PCI Express systems
• Low profile PCI Express form factor
• Flash for custom system configuration
• Link status LEDs through face plate
Specifications
MXH940 Product Specifications
Feature
Description
Link Speeds
64 Gbit/s per port, total 256 Gbit/s
Active Components
Microchip PFX PCI Express 4.0 Switch with DMA
Samtec FireFly
PCI 4.0
PCI Express®
Base Specification 4.0
Topologies
Point to point, 3 or 5 node Mesh Topology
Cable Connections
Dual x8 MPO connectors.
Fiber optic cable up to 200 meters
Power Consumption (Max)
12 Volt: 2.95 A
3.3 Volt: 0.84 A
3.3 VAUX: 0.35 A
Mechanical Dimensions
Low profile, Half Length - 68.90 mm (2.731 inches) x 167.65 mm (6.600 inches)
Operating Environment
Operating Temperature: 0°C - 55°C (32°F - 131°F), Air Flow: 700 LFM (Preliminary)
Relative Humidity: 5% - 95% (non-
Storage Environment
Storage Temperature: -40°C - 70°C (-40°F - 158°F)
Relative Humidity 95% (non-
Software
SuperSockets™ Berkley Sockets API
Microsoft WinSock2/LSP support
SISCI API
Advanced TCP/IP driver
PCIe bracket
Full height plate mounted
Half height plate not included, only available for x8 and x4 configurations.
Configuration
DIP-
NTB / safe boot
Regulatory Compliance
CE Mark
FCC Class A
RoHS compliant
Operating Systems
Windows
Linux
Order Information
Orderable part numbers:
Dolphin eXpressWare software license included with all NTB variants.
MXH84x NTB Host card variants
Part Number
Installed FireFly devices
MXH940
Two x8
MXH941
One x8
MXH943
Two x4
MXH944
One x4
MXH949
Four x4
Documentation/Software
Documentation and Software
Resources