Adapter
MXH919 Transparent Host Adapter
PCIe 4.0 / 3.0 Hybrid Products
[Dolphin Interconnect Solutions]
The MXH919 PCIe 4.0 Host Adapter is our medium performance transparent solution for connecting servers to external I/O subsystems. Based on Microchip® Gen4.0 PCI Express bridging architecture, the MXH919 adapter enables reliable transparent PCIe cable connections and clock isolation.
Product
PCIe 4.0 x8 Transparent Host Adapter
Model
MXH919 Transparent Host Adapter
Vendor
Dolphin Interconnect Solutions
Category
Automation & Industrial
Product Group
Dolphin ICS
Type
PCIe 4.0 / 3.0 Hybrid Products
Consulting
Requirements analysis and custom system design
Implementation
Integration guidance and lifecycle technical support
Verification
Testing against specifications and industry standards
Features
- One x8 PCIe edge port
- Two x4 PCIe Cable ports
- PCIe 4.0 cables
- Copper and Fiber cable support
- Quad SFF-8644 Connectors
- Host Transparent Bridging
- Low Profile Design
- Optional board management software
Description
MXH919 PCIe Host / Target Adapter Description
The MXH919 PCIe 4.0 Host Adapter is our medium performance transparent solution for connecting servers to external I/O subsystems. Based on Microchip® Gen4.0 PCI Express bridging architecture, the MXH919 adapter enables reliable transparent PCIe cable connections and clock isolation. The MXH919 has a PCIe 4.0 x8 Edge connector and two PCIe Gen 4.0 x4 SSF-8644 connectors and is typically recommended for fan-out where sustained PCIe Gen 4.0 x16 performance is not needed.
For high performance application, such as GPU farms, test and measurement equipment, medical equipment, and storage subsystem we recommend the MXH932 card.
Compatibility
The card does not supports the new PCI-SIG CMI (Cable Management Interface) protocol as defined in the current PCI-SIG External Cable specification 3.0 but uses a proprietary mechanism to transmit reset. Please contact Dolphin for more information on compatibility for PCIe target devices. If you need a transparent card with Host and Target functionality supporting the CMI protocol, please select the MXH932.
Cables
The MXH919 card has a dual SFF-8644 cable connector and supports PCIe 4.0 cables and is carefully designed for maximum cable lengths. Fiber optics extends this distance to 100 meters.
Configurations
The MXH919 uses an on-board DIP-Switch to select operational parameters. The adapter cable port can be configured as two x4 or one x8 PCIe connection. The card does not support being used as a Transparent Target card. Please select the MXH932 if you need a card supporting Transparent Target operation.
eXpressWare Board Management Software
The MXH919 Adapter card comes with the optional eXpressWare Board Management software for simplified monitoring and management.
PCI Express NTB
The MXH919 card is a transparent Host product only. To utilize Dolphin's PCIe NTB eXpressWare clustering software, you need to purchase the MXH918 PCIe 4.0 NTB adapter card.
Features
• PCI Express® 4.0 compliant - 16.0 GT/s per lane
• Link compliant with Gen1, Gen2, Gen3 and Gen4 PCI Express
• PCIe Gen 4.0 x8 Edge connector
• PCIe 4.0 cables
• Dual SFF-8644 x4 Gen4 PCI Express cable ports that can be configured as: ◦One - x8 PCI Express port ◦Two - x4 PCI Express ports
• Supports both copper and fiber-optic cables
• Host clock isolation support
• Low profile PCI Express form factor
• Flash for safe system configuration
• Link status LEDs through face plate
Dolphin PCIe 4.0 Transparent Adapter comparison
The table below compares the PCIe Gen 4.Transparent adapters available from Dolphin.
PCIe Edge
PCIe Cable port
Host/Target
CMI
MXH932
x16
Quad x4 SFF-
Host/Target
Yes
MXH919
x8
Dual x4 SFF-
Host
No
MXH917
x8
Quad x4 SFF-
Host
No
MXH915
x8
Single x4 SFF-
Host
No
Specifications
MXH919 Product Specifications
Feature
Description
Link Speeds
64 GT/s per port, total 128 GT/s
Cut through latency
100 nanoseconds
Active Components
Microchip Switchtec® Gen4 PCI Express Switch
PCI Express®
Base Specification4.0
Topologies
One x8 connection
Two x4 connections
Switch topologies using MXS924
Cable Port
Dual SFF-
Supported cables
PCIe 4.0 cables
PCIe 4.0 fiber optic cables
Maximum power rating
12 Volt: max 1.66A (no port power) 2.86A (max port power)
+3.3 Volt: Not connected
+3.3 Volt Aux: max 100mA
Typical power rating
12 Volt: 1.5 A (no port power)
+3.3 Volt: Not connected
+3.3 Volt Aux: max 100mA
PCIe Bracket
Full height plate mounted
Half height plate included
Mechanical Dimensions
Low profile, Half length 167.65mm- (6.6 inches) x 68.90 mm (2.731 inches)
Operating Environment
Operating Temperature: 0°C - 55°C (32°F - 131°F)
Airflow : 350 LFM (Preliminary)
Relative Humidity: 5% - 95% (non-
Software
No software needed
Configuration
DIP-
Host x4, x8, x16 Link, safe boot
Regulatory approvals
CE Mark
FCC Class A
RoHS compliant
UL94V-
Regulatory EMC tests
EN 55032:2012
EN 55035:2017
EN 61000-3-2:2014
EN 61000-3-3:2013
47 CFR Part 15, Subpart B (Clause 15.107 and 15.109) in conjunction with ANSI C63.4:2014
CISPR 35:2016 Edition 1.0 (CISPR/
Operating Systems
Basic operations - All
Order Information
Orderable part numbers:
MXH919 - Transparent Host functionality only
Documentation/Software
Documentation and Software
Resources