Adapter
MXH917 PCIe 4.0 Transparent Host Adapter
PCIe 4.0 / 3.0 Hybrid Products
[Dolphin Interconnect Solutions]
The MXH917 PCIe 4.0 Host Adapter is our medium performance transparent solution for connecting servers to external I/O subsystems. Based on Microchip® PCIe 4.0 bridging architecture, the MXH917 adapter enables reliable transparent PCIe cable connections and clock isolation.
Product
PCIe 4.0 x8/x16 Transparent Host Adapter
Model
MXH917 PCIe 4.0 Transparent Host Adapter
Vendor
Dolphin Interconnect Solutions
Category
Automation & Industrial
Product Group
Dolphin ICS
Type
PCIe 4.0 / 3.0 Hybrid Products
Consulting
Requirements analysis and custom system design
Implementation
Integration guidance and lifecycle technical support
Verification
Testing against specifications and industry standards
Features
- One x8 PCIe edge port
- Four x4 PCIe Cable ports
- PCIe 4.0 SFF-8644 cables
- Copper and Fiber cable support
- Quad SFF-8644 Connectors
- Host Transparent Bridging
- Low Profile Design
- Optional board management software
Description
MXH917 PCIe Host Adapter Description
The MXH917 PCIe 4.0 Host Adapter is our medium performance transparent solution for connecting servers to external I/O subsystems. Based on Microchip® PCIe 4.0 bridging architecture, the MXH917 adapter enables reliable transparent PCIe cable connections and clock isolation. The MXH917 has a PCIe 4.0 x8 Edge connector and four PCIe Gen 4.0 x4 SSF-8644 connectors and is typically recommended for fan-out where sustained PCIe 4.0 x16 performance is not needed.
For high performance application, such as GPU farms, test and measurement equipment, medical equipment, and storage subsystem we recommend the MXH932 card.
Compatibility
The card does not supports the new PCI-SIG CMI (Cable Management Interface) protocol as defined in the current PCI-SIG External Cable specification 3.0 but uses a proprietary mechanism to transmit reset. Please contact Dolphin for more information on compatibility for PCIe target devices. If you need a transparent card with Host and Target functionality supporting the CMI protocol, please select the MXH932.
Cables
The MXH917 card has a quad SFF-8644 cable connector and supports PCIe 4.0 SFF-8644 copper and fiber cables. Using the MXH917 as a Host card, standard PCIe cables enables basic transparent Host operations including propagation of host reset signal to the downstream device.
The MXH917 is carefully designed for maximum cable lengths. Fiber optics extends this distance to 100 meters.
Configurations
The MXH917 uses an on-board DIP-Switch to select operational parameters. The adapter cable port can be configured as four x4, two x8 or one x16 PCIe connection. The card does not support being used as a Transparent Target card. Please select the MXH932 if you need a card supporting Transparent Target operation.
eXpressWare Board Management Software
The MXH917 Adapter card comes with the optional eXpressWare Board Management software for simplified monitoring and management.
PCI Express NTB
The MXH917 card is a transparent Host product only. To utilize the Dolphin's PCIe NTB eXpressWare clustering software, you need to purchase the MXH930 PCIe 4.0 NTB adapter card.
Features
PCI Express® 4.0 compliant - 16.0 GT/s per lane
Link compliant with Gen1, Gen2, Gen3 and Gen4 PCI Express
PCIe 4.0 x8 Edge connector
PCIe 4.0 cables
Quad x4 SFF-8644 PCI Express 4.0 cable ports that can be configured as:
One - x16 PCI Express port
Two - x8 PCI Express ports
Four - x4 PCI Express ports
Supports both copper and fiber-optic cables
Host clock isolation support
Low profile PCI Express form factor
Flash for safe system configuration
Link status LEDs through face plate
Dolphin PCIe 4.0 Transparent Adapter comparison
The table below compares the PCIe 4.0 Transparent adapters available from Dolphin.
PCIe 4.0 Edge
PCIe 4.0 Cable port
Host/Target
CMI
MXH932
x16
Quad x4 SFF-
Host/Target
Yes
MXH919
x8
Dual x4 SFF-
Host
No
MXH917
x8
Quad x4 SFF-
Host
No
MXH915
x8
Single x4 SFF-
Host
No
Specifications
MXH917 Product Specifications
Feature
Description
Link Speeds
64 Gbit/s per port, total 128 Gbit/s
Cut through latency
120 nanoseconds
Active Components
Microchip Switchtec® Gen4 PCI Express Switch
PCI Express®
Base Specification 4.0
Topologies
One x16 connection
Two x8 connections
Four x4 connections
Switch topologies using MXS924
Cable Port
Quad SFF-
Supported cables
PCIe 4.0 cables
PCIe 4.0 fiber optic cable
Maximum power rating
12 Volt: max 1.66A (no port power) 2.86A (max port power)
+3.3 Volt: Not connected
+3.3 Volt Aux: max 100mA
Typical power rating
12 Volt: 1.5 A (no port power)
+3.3 Volt: Not connected
+3.3 Volt Aux: max 100mA
PCIe Bracket
Full height plate mounted
Half height plate included
Mechanical Dimensions
Low profile, Half length 167.65mm- (6.6 inches) x 68.90 mm (2.731 inches)
Operating Environment
Operating Temperature: 0°C - 55°C (32°F - 131°F)
Airflow : 350 LFM (Preliminary)
Relative Humidity: 5% - 95% (non-
Software
No software needed
Configuration
DIP-
Host x4, x8, x16 Link
Regulatory approvals
CE Mark
FCC Class A
RoHS compliant
UL94V-
Regulatory EMC tests
EN 55032:2012
EN 55035:2017
EN 61000-3-2:2014
EN 61000-3-3:2013
47 CFR Part 15, Subpart B (Clause 15.107 and 15.109) in conjunction with ANSI C63.4:2014
CISPR 35:2016 Edition 1.0 (CISPR/
Operating Systems
Basic operations - All
Order Information
Orderable part numbers:
MXH917 - Transparent Host functionality only
Documentation/Software
Documentation and Software
Resources