Feature
MXH830 PCIe NTB Host Adapter
PCIe 3.0 Products
[Dolphin Interconnect Solutions]
The MXH830 Gen3 PCI Express NTB Host Adapter is based on Microchip Switchtec® Gen3 PCI Express bridging architecture. The MXH830 host adapter includes advanced features for non-transparent bridging (NTB) and clock isolation.
Product
PCI Express Gen 3 x16 NTB Host Adapter
Model
MXH830 PCIe NTB Host Adapter
Vendor
Dolphin Interconnect Solutions
Category
Automation & Industrial
Product Group
Dolphin ICS
Type
PCIe 3.0 Products
Consulting
Requirements analysis and custom system design
Implementation
Integration guidance and lifecycle technical support
Verification
Testing against specifications and industry standards
Features
- One x16 PCIe edge port
- Four x4 PCIe Cable ports
- PCIe 3.0 cables
- 0.64 microsecond latency
- Low Profile Design
- Quad SFF-8644 Connectors
- Non Transparent Bridging
- 128 Gbit/s Performance
- Full Dolphin Software Stack
Description
MXH830 Host Adapter Description
The MXH830 Gen3 PCI Express NTB Host Adapter is based on Microchip Switchtec® Gen3 PCI Express bridging architecture. The MXH830 host adapter includes advanced features for non-transparent bridging (NTB) and clock isolation.
For high performance application, the MXH930, MXH940 or MXH950 host adapter is recommended.
Dolphin eXpressWare
The MXH830 card comes with a full license to the Dolphin eXpressWare clustering software. This includes
• SISCI API - a robust and powerful shared memory programming environment for PCIe
• Standard TCP/IP drivers
• SuperSockets socket accelerator software
• SmartIO - access to remote PCIe devices over PCIe
• Board management software
The MXH830 does not have an on chip PCIe DMA engine, but Dolphin's software suite takes advantage of System DMA (RDMA) and CPU PIO data transfer scheme to effectively supporting both large and small data packets. PIO transfers optimize small packet transfers at the lowest latency. The eXpressWare software is currently available for Linux, Windows.
The overall software framework is designed for rapid development and deployment of inter-processor communication systems.
Cables
The MXH830 card has a quad SFF-8644 cable connector and supports PCIe 3.0 cables. The MXH830 is carefully designed for maximum cable lengths.
Configurations
The MXH830 can be used to create several types of PCIe networks:
• A two node network can be realized using 4 cables (x16). Full x16 performance between the two systems.
• A three node network can be realized using 2 cables (x8) between each system. Full x8 performance between the three systems.
• A five node network can be realized using 1 cable (x4) between each system. Full x4 performance between the five sysgems
• Larger configurations can be realized with one or more of the MXS824 24 port Gen3 switch.
Transparent PCIe
The MXH830 firmware also supports transparent operations. If you don't need the Dolphin eXpressWare, please select the MXH832 Gen3 Adapter card.
Features
• PCI Express® 3.1 compliant - 8.0 Gbps per lane
• Link compliant with Gen1 and Gen2 PCI Express
• PCI Express 3.0 cables
• Quad SFF-8644 x4 Gen3 PCI Express NTB cable ports that can be configured as: ◦One - x16 PCI Express port ◦Two - x8 PCI Express ports ◦Four - x4 PCI Express ports
• RDMA support through PIO and System DMA
• Full host Clock isolation support. Automatic support for host running CFC or SSC
• Non-transparent bridging to cabled PCI Express systems
• Low profile PCI Express form factor
• EEPROM for custom system configuration
• Link status LEDs through face plate
Specifications
MXH830 Product Specifications
Description
Link Speeds
32 Gbit/s per port, total 128 Gbit/s
Application Performance
0.5 microsecond latency (application to application)
Active Components
Microchip Switchtec® Gen3 PCI Express Switch
PCI Express®
Base Specification 3.1
Card Electromechanical Specificaiton 3.0
External Cabling Specification Spec 3.0
Topologies
2 node direct cable
3 - 5 node mesh topology
Switch topologies using MXS824
Cable Port
Quad SFF-
Supported cables
PCIe 3.0 copper cables
PCIe 3.0 fiber optic cable (limited performance)
Power Consumption
12 Volt : Max 19.6 Watts
12 Volt : Max 24 Watts including AOC
+3.3 Volt: Not connected
+3.3 Volt AUX: Max 1 Watt
Mechanical Dimensions
Low profile, Half length 168.2mm- (6.6 inches) x 69.2 mm (2.7 inches)
Operating Environment
Operating Temperature: 0°C - 50°C (32°F - 122°F)
Air Flow : 150 LFM
Relative Humidity: 5% - 95% (non-
Software
SuperSockets™ Berkley Sockets API
Microsoft WinSock2/LSP support
SISCI API
TCP/IP driver
Multicast groups
Max 16, default 4
Configuration
DIP-
Regulatory approvals
CE Mark
FCC Class A
RoHS compliant
UL94V-
Operating Systems
Windows
Linux
VxWorks
Order Information
Orderable part numbers:
MXH830 - NTB Host + Transparent Host + Target functionality Dolphin eXpressWare software license
MXH832 - Transparent Host + Target functionality only
Documentation/Software
Documentation and Software
Resources